After-payment possiblity

Log hoist for a log grapple PVH-2

Log hoist for a log grapple PVH-2: Log winch as an accessory for log gripper H1500 and H1000. Suitable for coupling with grapple for different tractors (20-80 hp) The device allows to transport and transport timber from soft areas in the forest, and on the edge of a ditch. If a larger brush cut is in progress, this winch is also a good helper as an accessory for the gripper to pull the brush together. The log winch for the log gripper PVH-2 can be easily bolted to the frame of the gripper, and the winch is driven by a cardan shaft from the PTO shaft. The winch is controlled from the winch by a metal lever. The winch has 50 ropes on top, which can be used to pull the logs to the required distance and transport them from there with a grab. However, it is also possible to tow this same winch with a rope, as the rope block has a special lock that locks the rope block. Both our H 1500 and H 1000 models have a winch ready for installation. So if you want to buy a winch later, this is not a problem. The winch can be added at any time. It is a good and durable tractor auxiliary tool for farm forestry work. Easy to use and suitable for many different tractors. Call or email us for more information and a quote!



  • The log winch is driven by a PTO shaft
  • The winch is attached to the Grab with bolts and the block wheel is attached under the bolts of the center link
  • Length of tow rope 50m
  • Traction cable diameter 8mm
  • Winch pulling force 3500kg
  • Winch weight 70 kg
  • Made in Estonia


Contact Us